PRODUCT SPECIFICATIONS
Liquid-cooling Cables

Explore the overview, technical parameters and dimension drawings of this WOER charging solution.

MCS Two-in Four-out Oil-Cooled Charging Connector 1500A

Product Overview

WOER-MCS-C-DC1500-01-LC1 Liquid-cooled charging connector is designed for rapid charging of electric vehicles (EVs) with direct current (DC) through the vehicle connector, installed on electric vehicle charging stations (EVSE). The power cable of the liquid-cooled charging connector employs an immersion cooling solution using dimethicone as the cooling medium. Through forced cooling, heat generated by the cable is dissipated, enabling smaller-cross-section cables to carry higher currents.

Product Model

The interface dimensions comply with IEC DTS 63379-2026 standards, with a rated current of 1500A and voltage of 1500V. Product model: WOER-MCS-C-DC1500-01-LC1.

Product Technical Parameters

Rated voltage1500V
Rated current1500A(Constant current)
Withstand voltage4000V AC /min
Insulation resistanceAt normal temperature conditions ≥500MΩ;Compliant with GB/T11918.1-2014 under humid and hot conditions
temperature sensors typesNTC 10K / PT1000
Temperature sensor intervention value90℃
Insertion and extraction lifespan10,000 insertion and extraction cycles(no-load)
Operating ambient temperature-30℃~50℃
Flame retardant ratingUL 94-V0
Conductor specifications2*50mm²(DC+/DC-)
Cable colorBlack
cable outer diameterΦ46±1.5mm
Operating altitude≤2000m
Plastic materialThermoplastic
Terminal materialT2 Pure Copper/Brass
Terminal surface treatmentsilver plating
Connector tip protection ratingCoupling status: IP55/Connector body: IP67
Cooling mediumShell E4
Insertion and extraction force≤100N
Working flow rate2-6LPM/25°C
Working pressure of liquid cooling system0.6MPa
Maximum allowable pressure of liquid cooling connector0.7MPa
Cable outer sheath materialTPU
Cable bending radius>6D
Cable structure4×50mm²+1×25mm²+P(2×0.75mm²)+2×1.5mm²+6×0.75mm²

Product Specification

MCS Two-in Four-out Oil-Cooled Charging Connector 1500A specification

Need a Custom Configuration?

Tell us your rated current, connector standard and cable length — our engineers will propose the right solution.

Get a Quote

MORE PRODUCTS